COVID 19 – We remain open & fully operational – For more info
RX Solutions X-Act software integrates a complete interface to inspect accurately your samples. This is not only an acquisition and reconstruction software, it is above all an advanced solution that embeds a large number of functionalities that always enable to get the best possible results, whatever the sample.
Live inspection
Radiography is quick and easy with X-Act. Software filters are included to improve sharpness and contrast. 3D measurements can be taken directly on the radio.
Data acquisition
The workpiece previously positioned in the equipment rotates through 360°. During this rotation, a set of radio projections are acquired at different angles.
Data processing
All the projections made during the acquisition step are reconstructed as a 3D volume. The volume thus generated will serve as the basis for the optional third step: post-processing.
High resolution in X-Ray µCT generally means the occurrence of small angle scattering also known as phase contrast artefacts, especially with low absorbing materials. Phase signal contributions are no longer negligible regarding the X-Ray absorption, resulting in a new contrast phenomena that offers edges enhancements, but a lower absorption contrast between phases.
This correction allows you remove beam artefacts from your component without having a proper spectrum estimation. It's a user-guided algorithm offering a simple way to compute the estimated absorption photons curve and correct the image deviation.
Ring artefacts result from a non-linear response of the detector which generates circular artefacts centered on the rotation axis. This correction works directly on the projections and preserves the image features/resolution.